How often should tires be inflated

Maintaining the correct tire pressure in your vehicle is essential to ensure safety, efficiency, and durability.

The recommended frequency for inflating your tires can vary depending on several factors, including the type of vehicle, driving conditions, and climate. However, there are some general guidelines you can follow:

1. Monthly Check

A good practice is to check your tire pressure at least once a month. Even if the tires don’t appear to be losing air, there may be small leaks that can accumulate over time. Additionally, temperature changes can affect the pressure, causing it to decrease in cold weather and increase in warm weather.

2. Before Long Trips

It is always recommended to check and inflate the tires before embarking on a long trip. Long distances and high speeds can put additional pressure on the tires, so ensuring they are in optimal condition can prevent issues on the road.

3. After Temperature Changes

Drastic temperature changes can significantly affect tire pressure. For example, a 10-degree Celsius drop can reduce pressure by approximately 1 psi. During the winter months, it is especially important to check the pressure more frequently.

4. When the Vehicle Is Loaded

If you plan to carry a heavy load or transport several passengers, check the tire pressure before setting off. Loaded vehicles require higher pressure to support the extra weight and maintain safe handling.

Why is it important to have the proper tire pressure

Incorrect pressure can lead to several issues:

• Irregular wear: Underinflated tires tend to wear more on the edges, while overinflated ones wear more in the center.
• Increased fuel consumption: Incorrect pressure increases rolling resistance, which results in higher fuel consumption.
• Risk of blowouts: Tires with inadequate pressure are more likely to experience blowouts, especially at high speeds.
• Reduced vehicle control: Incorrect pressure affects maneuverability and stability, increasing the risk of accidents.

How to Check and Inflate Tires

• Use a quality gauge: Digital gauges are generally more accurate than analog ones.
• Check the tires when they are cold: Tire pressure should be measured when the tires are cold, meaning the vehicle has not been driven for at least three hours.
• Consult the manufacturer's recommendations: The recommended pressure for your tires can be found in the owner's manual, on a label on the driver's door frame, on the gas cap or on our website by clicking here.
• Measure the pressure: Remove the valve cap and press the gauge firmly onto the valve. Read the pressure displayed.
• Adjust the pressure: Add air if the pressure is low or release air if it's high, until the recommended pressure is reached.

Benefits of Maintaining Proper Tire Pressure

• Safety: Reduces the risk of tire-related accidents.
• Fuel efficiency: Optimizes fuel consumption.
• Tire longevity: Prolongs the life of the tires.
• Comfortable driving: Improves stability and comfort while driving.

---

In the United States, it is mandatory for all vehicles to have a TPMS sensor installed. I’m sharing with you some sensors that I believe offer the best value for money. Based on your budget and needs, you can explore any of these that catch your attention!

---

---

---

---

---

---

---